Filear has got some crazy news for all General Motors owners. According to its latest findings, now your one key could operate to program a replacement keyless entry remote for up to four vehicles. Even better, when the battery goes down, remotes may require to be re paired with the vehicle. Just make it sure to have all of your remotes handy, the process will clear the vehicle of any paired remotes and you will need to reprogram all remotes. Just follow the simple instructions below:
Close all the doors of the GM model you want to try the trick on
Insert the ignition key into the ignition lock cylinder but take care not to turn the ignition switch
Now press and hold the DOOR unlock switch
While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF for 2-3 times
Take care if the door lock clicks after the second ON, OFF cycle do not do it a third time
Release the DOOR unlock switch.
Now the doors will lock and unlock one time to confirm the program mode is activates
Concurrently press and hold the LOCK button and the UNLOCK button on one keyless remote for approximately 15 seconds
The above step will help you to confirm the programming of the transmitter (the doors will lock and unlock)
Now repeat the previous step to program up to four transmitters
Turn the ignition switch to the ON position in order to exit the keyless entry transmitter mode
Operate the transmitter functions in order to verify correct system operation as you are done.
No comments:
Post a Comment